[Rim (Box) Locks] [Mortise Locks] [Pocket Door Locks] [Thumb Latches] [Window Hardware] [Bolts] [Door Bells & Knockers] [Miscellaneous Hardware] (Hinges)

Original Antique Hardware Restored to Working Order

Ed Donaldson Hardware Restorations
Antique door bolts - Page 5


 Reference # 600-857

1 available

Note
: Sale of this item is not complete until you receive confirmation from us.

Quantity:

Reminder: Please provide 3 digit security code from back of credit card in Comments Section when ordering

Nicely formed early wrought iron door hook with two drive-in staples.  Staples are to be clinched when through the door.  Larger size hook measuring 9 3/4" overall with hook drop 1 3/4".

Early Wrought Iron Hook, Complete
Price $ 35.00

  


Reference # 600-735

1 available

Note
: Sale of this item is not complete until you receive confirmation from us.

Quantity:

Reminder: Please provide 3 digit security code from back of credit card in Comments Section when ordering

A circa 1870's surface mount rim style keyed security dead bolt, marked BLW (Branford Lock Works) and measuring 5 1/2" high x 3 1/2" x 1 1/4" without the keeper.  Keeper is additional 1 1/4" wide.  The backset is 2 1/4" and takes a thin flat key.  The bolt is 1 3/4" high and extends 3/4".   Bolt is reversible and can be mounted as left or right hand.  The accompanying key escutcheon measures 2 5/8" x 1 5/8".  Restored and complete with mounting screws.

BLW Rim Style Security Dead Bolt
Price $ 150.00 

    

 


Reference # 600-852

1 available

Note
: Sale of this item is not complete until you receive confirmation from us.

Quantity:

Reminder: Please provide 3 digit security code from back of credit card in Comments Section when ordering

Wrought iron hasp catch with a pivot drop hook.  Hasp measures 12 3/4" deep x 1" wide overall and is right hand only - not reversible.  The drop hook is 4" with a 2" drop.  Accompanied by the U staple which mounts through the slot for the hook to drop into securing a door.  Nice end curl used as the pull measures about 1 3/8" extension.  This type of latch was used for many applications during the 18th and 19th century wherever a door needed a one sided catch.  For the most part they were used in exterior applications and show surface pitting from weather and age as this one does.
 
 Wrought Iron Hasp Catch
 Price $ 55.00
 

                        



Reference # 600-873

1 A
vailable

Note: Sale of this item is not complete until you receive confirmation from us.

Quantity:

Reminder: Please provide 3 digit security code from back of credit card in Comments Section when ordering

      Victorian mortise privacy bolt, new old stock (never used) in original finish and complete.  Decorative cast bronze thumb turn operator and round escutcheon plate is pictured below in close-up.  When mounted, the  bolt is entirely mortised within the door and only the thumb turnand plate are visible.  Mortise bolt measures approximately 2 1/4" deep x 1 1/4" high with a 1 1/2" backset.  The ornate thumb turn extends 7/8" from the plate which is 1 1/8" diameter.  Bolt throws 1/2".  The face of the bolt as well as the original jamb keeper measure 2 1/2" x 13/16". 

NOS Original Finish Victorian Bronze Privacy Bolt
Price $ 35.00

     



Reference # 600-874

1 available

Note: Sale of this item is not complete until you receive confirmation from us.

Quantity:

Reminder: Please provide 3 digit security code from back of credit card in Comments Section when ordering

 Victorian mortise privacy bolt, new old stock (never used) in original finish and complete.  Decorative cast brass thumb turn operator and escutcheon plate is pictured below in close-up.  When mounted, the  bolt is entirely mortised within the door and only the thumb turn and plate are visible.  Mortise bolt measures approximately 2 1/4" deep x 1 1/4" high with a 1 1/2" backset.  The ornate thumb turn extends 3/4" from the plate which is 7/8"high x 3/4" across.  Bolt throws 1/2".  The face of the bolt as well as the original jamb keeper measure 2 1/2" x 13/16". 

NOS Original Finish Victorian Brass Privacy Bolt
Price $ 35.00

     

 

 


Reference # 600-863

8 available
Note
: Sale of this item is not complete until you receive confirmation from us.

Quantity:

Reminder: Please provide 3 digit security code from back of credit card in Comments Section when ordering

Flush mount ornate cast iron door bolts - new old stock never used in original finish and complete.  Bolt is  mounted as semi-mortise so that when it is in place it is flush with the door surface,  Bolt configuration shown in side photo below left and showing the mechanism is mortised into the door surface and hidden from sight requiring a 5/8" mortise.  The bolt measures /8" x 1 1/8" - matching keepers measure 1 13/16" x 1" and operator knob is 5/8".  Close-up of the bolt below shows the decorative detail and the original finish in very good conditoin.  dddd

Flush Mount Door Bolts, New Old Stock, Original Finish
Price $ 75.00
each

           


Reference # 600-864

2 available
Note
: Sale of this item is not complete until you receive confirmation from us.

Quantity:
Reminder: Please provide 3 digit security code from back of credit card in Comments Section when ordering

 

Victorian mortise privacy bolt, new old stock (never used) in original finish and complete.  Decorative cast iron thumb turn operator and rectangular escutcheon plate are pictured below in mounted position.  When mounted, the cylinder bolt is entirely mortised within the door and only the plate and thumb turn are visible.  Mortise bolt measures approximately 2 1/2" deep x 3/4" diameter with a 2" backset.  The ornate thumb turn extends 1" from the plate which is 1 5/8" high x 7/8" wide.  Original jamb keeper (1 5/8" x 7/8") is pictured to the left of the bolt. 

NOS Original Finish Victorian Privacy Bolt
Price $ 60.00
each